Amer Networks E5Web GUI - Manual (Page 338)

the default route.
Default: Enabled
IGMP Before Rules
For IGMP traffic, by-pass the normal IP rule set and consult the IGMP rule set.
Default: Enabled
IGMP React To Own Queries
The security gateway should always respond with IGMP Membership Reports, even to queries
originating from itself. Global setting on interfaces without an overriding IGMP Setting.
Default: Disabled
IGMP Lowest Compatible Version
IGMP messages with a version lower than this will be logged and ignored. Global setting on
interfaces without an overriding IGMP Setting.
Default: IGMPv1
IGMP Router Version
The IGMP protocol version that will be globally used on interfaces without a configured IGMP
Setting. Multiple querying IGMP routers on the same network must use the same IGMP version.
Global setting on interfaces without an overriding IGMP Setting.
Default: IGMPv3
IGMP Last Member Query Interval
The maximum time in milliseconds until a host has to send an answer to a group or
group-and-source specific query. Global setting on interfaces without an overriding IGMP
Setting.
Default: 5,000
IGMP Max Total Requests
The maximum global number of IGMP messages to process each second.
Default: 1000
IGMP Max Interface Requests
The maximum number of requests per interface and second. Global setting on interfaces without
an overriding IGMP Setting.
Default: 100
IGMP Query Interval
Chapter 4: Routing
338