Amer Networks E5Web GUI - Manual (Page 66)

• Realtime loggers: 4
• Stat pollers: 4
• Receive contexts: 2
• Send contexts: 4
NetConMaxChannels is the maximum total allowed for all these connection types. This means
that with the default value of 18, 2 extra connections are allowed and they can be of any of the
above types.
Default: 18
Validation Timeout
Specifies the amount of seconds to wait for the administrator to log in before reverting to the
previous configuration.
Default: 30
WebUI HTTP port
Specifies the HTTP port for the Web Interface.
Default: 80
WebUI HTTPS port
Specifies the HTTP(S) port for the Web Interface.
Default: 443
HTTPS Certificate
Specifies which certificate to use for HTTPS traffic. Only RSA certificates are supported.
Default: HTTPS
2.1.10. Working with Configurations
Configuration Objects
The system configuration is built up by Configuration Objects, where each object represents a
configurable item of any kind. Examples of configuration objects are routing table entries,
address book entries, service definitions, IP rules and so on. Each configuration object has a
number of properties that constitute the values of the object.
Object Types
A configuration object has a well-defined type. The type defines the properties that are available
for the configuration object, as well as the constraints for those properties. For instance, the
IP4Address type is used for all configuration objects representing a named IPv4 address.
Chapter 2: Management and Maintenance
66