Amer Networks E5Web GUI - Manual (Page 366)

Device:/DHCPServer1> show DHCPServerPoolStaticHost 1
Property Value
----------- -----------------
Index: 1
Host: 192.168.1.1
MACAddress: 00-90-12-13-14-15
Comments:
5. The assignment could be changed later to IP address 192.168.1.12 with the following
command:
Device:/DHCPServer1> set DHCPServerPoolStaticHost 1
Host=192.168.1.12
MACAddress=00-90-12-13-14-15
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1. Go to: Network > DHCP Services > DHCP Servers > DHCPServer1
2. Select Static Hosts
3. Select Add > Static Host Entry
4. Now enter:
• Host: 19.168.1.1
• MAC: 00-90-12-13-14-15
5. Click OK
5.2.2. Custom IPv4 Options
Adding a Custom Option to the DHCP server definition allows the administrator to send specific
pieces of information to DHCP clients in the DHCP leases that are sent out.
An example of this is certain switches that require the IP address of a TFTP server from which
they can get certain extra information.
Custom Option Parameters
The following parameters can be set for a custom option:
Code This is the code that describes the type of information being sent to the client. A large
list of possible codes exists.
Type This describes the type of data which will be sent. For example, if the type is String then
the data is a character string.
Chapter 5: DHCP Services
366