Amer Networks E5Web GUI - Manual (Page 645)

For external client connection, a web browser should be directed to the IP address my_sslvpn_if.
This is done either by typing the actual IP address or using a URL that can resolve to the IP
address.
Example 9.17. Setting SSL VPN Interface Client Routes
This example shows how change the SSL VPN tunnel called my_sslvpn_if so that the only route
added to the routing table of clients is a route to the protected network protected_server_net
which is already defined in the cOS Core address book.
Command-Line Interface
Device:/> set Interface SSLVPNInterface my_sslvpn_if
ClientRoutes=protected_server_net
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1. Go to: Network > Interfaces and VPN > SSL
2. Select the tunnel called my_sslvpn_if
3. Under Client Routes move the address object protected_server_net from Available to
Selected.
4. Click OK
Chapter 9: VPN
645