Amer Networks E5Web GUI - Manual (Page 337)

• Destination Interface: core
• Destination Network: auto
• Multicast Source: 192.168.10.1
• Multicast Group: 239.192.10.0/24
4. Click OK
B. Create the second IGMP Rule:
1. Again, go to: Network > Routing > IGMP Rules > Add > IGMP Rule
2. Under General enter:
• Name: A suitable name for the rule, for example Queries_if2
• Type: Query
• Action: Proxy
• Output: if2 (this is the relay interface)
3. Under Address Filter enter:
• Source Interface: wan
• Source Network: UpstreamRouterIp
• Destination Interface: core
• Destination Network: auto
• Multicast Source: 192.168.10.1
• Multicast Group: 239.192.10.0/24
4. Click OK
Advanced IGMP Settings
There are a number of IGMP advanced settings which are global and apply to all
interfaces which do not have IGMP settings explicitly specified for them.
4.7.4. Advanced IGMP Settings
The following advanced settings for IGMP can be found in the Web Interface by going to:
Network > Routing > Advanced Multicast Settings
Auto Add Multicast Core Route
This setting will automatically add core routes in all routing tables for the multicast IP address
range 224.0.0.0/4. If the setting is disabled, multicast packets might be forwarded according to
Chapter 4: Routing
337