Adding an ip network, Adding an ip range – Amer Networks E5Web GUI User Manual
Page 129
3.
Enter 192.168.10.16 for the IP Address
4.
Click OK
Example 3.2. Adding an IP Network
This example adds an IPv4 network named wwwsrvnet with address 192.168.10.0/24 to the
address book:
Command-Line Interface
Device:/> add Address IP4Address wwwsrvnet Address=192.168.10.0/24
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Address Book > Add > IP4 Address
2.
Specify a suitable name for the IP network, for example wwwsrvnet
3.
Enter 192.168.10.0/24 as the IP Address
4.
Click OK
Example 3.3. Adding an IP Range
This example adds a range of IPv4 addresses from 192.168.10.16 to 192.168.10.21 and names the
range wwwservers:
Command-Line Interface
Device:/> add Address IP4Address wwwservers
Address=192.168.10.16-192.168.10.21
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Address Book > Add > IP4 Address
2.
Specify a suitable name for the IP Range, for example wwwservers.
3.
Enter 192.168.10.16-192.168.10.21 as the IP Address
Chapter 3: Fundamentals
129