Amer Networks E5Web GUI - Manual (Page 352)

3. Click OK
Configure the routing:
1. Go to: Network > Routing > Routing Tables > main > Add > SwitchRoute
2. Now enter:
• Switched Interfaces: transparent_group
• Network: 10.0.0.0/24
3. Click OK
Configure the rules:
1. Go to: Policies > Add > IPRule
2. Now enter:
• Name: http_lan_to_dmz
• Action: Allow
• Service: http
• Source Interface: lan
• Destination Interface: dmz
• Source Network: 10.0.0.0/24
• Destination Network: 10.1.4.10
3. Click OK
4. Go to: Policies > Add > IPRule
5. Now enter:
• Name: http_wan_to_dmz_sat
• Action: SAT
• Service: http
• Source Interface: wan
• Destination Interface: dmz
• Source Network: all-nets
• Destination Network: wan_ip
• Translate: Destination IP
• New IP Address: 10.1.4.10
6. Click OK
Chapter 4: Routing
352