Comtech EF Data C5 - Manual (Page 85)

C5/K1/K3 Integrated Satellite Terminal System Specifications
Rev. 0 2–51
2.7.2 SDT-5200 (IDU) System Specifications
The SDT-5200 IDU is a complete, variable-rate satellite modem, high-stability reference,
and power supply in a 1 RU package.
Refer to Table 2-30 for IDU system specifications.
Table 2-30. SDT-5200 System Specifications
Parameter Specifications
IF Output Connector Type N female
IF Input Connector Type N female
RX-AUX Connector BNC female
Data I/O Connector EIA-530, 25-pin D sub, female (EIA-422, EIA-232, and V.35)
EIA-449, 37-pin D sub, female, (EIA-422) Optional
EFD Standard, 50-pin D sub, female (ASYNC) Optional
V.35, 34-pin Winchester Optional
Alarm Connector Form C Contact, 9-pin D sub, female
Fault Connector Form C Contact, 9-pin D sub, female
Auxiliary Connector Open Collector, 9-pin D sub, female
Remote Connector EIA-232 or EIA-485, 9-pin D sub, female
Prime Power 85 to 264 VAC, 47 to 63 Hz, using a 6 foot (2 meter) cable 3-prong plug:
meets EFData QUA-014, Operating Procedures.
Power Consumption 60W maximum
Size
Weight
Mounting 1.75H x 19W x 17.8D inches (4.4 x 48.26 x 45.21 cm)
12 lb. maximum (5 kg)
Standard 19-inch (48.26 cm) rack. Must accept front and rear mounts and
accept standard rack mount slides.
Temperature
Humidity
Shock 0 to 50
&C (32 to 122&F)
90% non-condensing
When any one corner of the IDU is dropped from 1 cm onto a hard
surface, the IDU will not take any errors or faults.
Agency Compliance:
Safety
Emissions
Susceptibility CE MARK – EN60950
CE MARK – EN55022-1
CE MARK – EN50082-1
Warm-up Time < 30 minutes