Led indicators, 1 led indicators – Comtech EF Data C5 User Manual
Page 128
Operation
C5/K1/K3 Integrated Satellite Terminal System
4–2
Rev. 0
All functions are accessible at the front panel by entering one of six pre-defined Function
Select categories or levels:
! Configuration
! Monitor
! Faults/Alarms
! Stored Faults/Alarms
! Remote AUPC
! Utility
4.1.1 LED
Indicators
The 10 LEDs on the front panel indicate:
! General modem summary faults
! Status
! Alarms
The indicators are defined as follows:
Name
LED
Explanation
Faults
Transmit
Red
A fault condition exists in the transmit chain.
Receive
Red
A fault condition exists in the receive chain.
Common
Red
A common equipment fault condition exists.
Stored
Yellow
A fault has been logged and stored.
The fault may or may not be active.
Status
Power On
Green
Power is applied to the modem.
Transmitter On
Green
Transmitter is currently on.
This indicator reflects the actual condition of the transmitter, as
opposed to the programmed condition.
Carrier Detect
Green
Decoder is locked.
Test Mode
Yellow
Flashes when the modem is in a test configuration.
Alarms
Transmit
Yellow
A transmit function is in an alarm condition.
Receive
Yellow
A receive function is in an alarm condition.