Comtech EF Data C5 - Manual (Page 189)

C5/K1/K3 Integrated Satellite Terminal System Operation
Rev. 0 4–63
REV EMULATION Programs an emulation mode of a previous functional revision. This allows the user to select
the CURRENT VERSION or FUNCTIONAL X.
Note: The number displayed in the CURRENT VERSION position increases with each
software version change.
Upon entry, the CURRENT VERSION is displayed. Press [
$] or [%] to select the
FUNCTIONAL version. Press [ENTER] to execute the change.
Notes:
1. Programming a current version (default) allows all features and options (if
installed) to operate normally.
2. Programming a FUNCTIONAL version (X) eliminates any changes that affect
the later version. Only functional changes are affected by the revision emulation
feature.
3. A correction change (e.g., VER 3.1.2) remains fixed in accordance with the
latest version. Since the revision emulation default is the current version,
program the functional version at the start of each operation.
4. The revision emulation feature does not affect some interface changes for the
direct operation of the modem (Configuration save/recall, test mode screen in
the Utility/System, all factory setup modes, etc.).
MODEM OPTIONS (Status Only).
Displays the installed modem options.
If the option is installed, a “+” symbol is displayed. To view the available options press
[ENTER]. Observe for the flashing cursor. Press the [
"] [#] arrows to move from one
symbol to the next. The first line will display the option. The second line will display the
status:
!
A “+” symbol indicates the option is installed.
!
A “-” symbol indicates the option is FAST accessible.
!
An “x” symbol indicates the option is Not Installed or Field Upgradable.
CARD #1 Type (Status Only.)
Displays installed overhead options.
CARD #2 Type (Status Only.)
Displays installed Reed-Solomon 02 options.
CARD #3 TYPE (Status Only.)
Displays installed Reed-Solomon 03 options.
CARD #1 OPTIONS (Status Only.)
Displays installed overhead options.
CARD #2 OPTIONS (Status Only.)
Displays installed Reed-Solomon 02 options.
CARD #3 OPTIONS (Status Only.)
Displays installed Reed-Solomon 03 options.
LOCAL MODEM
AUPC Configures the modem for the self-monitoring Local Modem AUPC mode.
Note: The self-monitoring Local Modem AUPC mode is not used when the ASYNC/AUPC
interface option is installed.
Refer to Appendix A for more information.