Comtech EF Data C5 - Manual (Page 150)

Operation C5/K1/K3 Integrated Satellite Terminal System
4–24 Rev. 0
SDT5200 "TYPE"
VER: X.X.X
FUNCTION SELECT
CONFIGURATION
CONFIGURATION
LOCAL AUPC
(AUPC option only)
AUPC ENABLE NOMINAL POWER MINIMUM POWER MAXIMUM POWER
TARGET NOISE TRACKING RATE LOCAL CL ACTION REMOTE CL ACTION
OFF
ON See Description Table
3.2 to 16.0 dB
In 0.1 dB steps
0.5 to 6.0 dBm/min
In 0.5 dBm/min steps
HOLD
NOMINAL
MAXIMUM
See Description Table See Description
HOLD
NOMINAL
MAXIMUM
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 4-7. Configuration Local AUPC Menu