Comtech EF Data C5 User Manual
Page 314

Remote Control Operation
C5/K1/K3 Integrated Satellite Terminal System
B–30
Rev. 0
Bulk
Consol.
Status
(continued)
Parameter
Number
Parameter Name
(Command Reference)
Description
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
Transmit clock source
(ref. 'TC_' command).
External reference frequency
(ref. 'ERF_' command).
Transmit clock phase
(ref. 'TCP_' command).
Receive clock phase
(ref. 'RCP_' command).
Baseband loopback
(ref. 'BBL_' command).
Interface loopback
(ref. 'ILB_' command).
Interface loop timing
(ref. 'ILT_' command).
TX Interface coding format
(ref. 'ICFT_' command).
RX Interface coding format
(ref. 'ICFR_' command).
Buffer clock source
(ref. 'BC_' command).
Interface RX-T1 frame structure
(ref. 'IRFS_' command).
Reserved null field.
Interface RX-E1 frame structure
(ref. 'IRFS_' command).
Reserved null field.
Interface Buffer Programming
(ref. 'IBP_' command).
Interface buffer size
(ref. 'IBS_' command).
Interface transmit overhead type
(ref. 'ITOT_' command).
Interface receive overhead type
(ref. 'IROT_' command).
Interface substitution pattern
(ref. 'ISP_' command).
p33 = n, where 'n' is '0' (INT), '1' (REF) or '2' (EXT).
p34 = nnnnn.n, external reference frequency in kHz.
p35 = n, where 'n' is '0' (NRM), '1' (INV), or '2' ( AUTO).
p36 = n, where 'n' is '0' (NRM) or '1' (INV).
p37 = n, where 'n' is '0' (off) or '1' (on).
p38 = n, , where 'n' is '0' (off) or '1' (on).
p39 = n, where 'n' is '0' (off) or '1' (on).
40 = n, where 'n' is '0' (AMI), '2' (B8ZS), or '3' (HDB3).
p41 = n, where 'n' is '0' (AMI), '2' (B8ZS), or '3' (HDB3).
p42 = n, where 'n' is '0' (INT), '1' (REF), '2' (EXT), '3' (SAT),
or '5' (INS).
p43 = n, where n is '0' (NONE) or '1' (G704).
p45 = n, where n is '0' (NONE) or '1' (G704).
p47 = n, where 'n' is '0' (BITS) or '1' (MS).
p48 = nnnnnn, buffer size in bits or milli seconds.
p49 = n, where 'n' is '0' (NONE), '1' (IDR), '2' (IBS), '3' (DI),
or '4' (ASYNC).
p50 = n, where 'n' is '0' (NONE), '1' (IDR), '2' (IBS), '3' (DI),
or '4' (ASYNC).
p51 = n, where 'n' is '0' (off) or '1' (on).