Comtech EF Data C5 - Manual (Page 80)

Specifications C5/K1/K3 Integrated Satellite Terminal System
2–46 Rev. 0
2.5.3.1 Local Automatic Uplink Power Control (AUPC)
AUPC functions are available with ASYNC interface. The operator can select local AUPC
to be enabled or disabled.
The operator can select the
E
b
/N
0
target setpoint from 3.2 to 16.0 dB in 0.1 dBm steps.
2.5.3.2 Remote AUPC
1. The operator can select remote AUPC to be enabled or disabled.
2. The operator can select a remote TX 2047 test pattern and a remote baseband
loopback to be enabled or disabled.
3. The operator can monitor the remote AUPC 2047 BER.