Comtech EF Data C5 - Manual (Page 83)

C5/K1/K3 Integrated Satellite Terminal System Specifications
Rev. 0 2–49
Table 2-29. Remote Control Functions (Continued)
Interface (Continued)
Receive Driver Type V.35, EIA-422, or EIA-232
Transmit Clock Internal, External, or Reference
External Clock Reference 8.0 to 10000 kHz
Receive Buffer Size 32 to 262144 bit/s, in 16 bit/s steps or 0 to 50 ms, in 1 ms step
Transmit Clock Phase Auto, Normal, or Inverted
Buffer Clock Internal, External, Reference, or Saturated
Receive Clock Phase Normal or Inverted
Baseband Loopback On or Off
Interface Loopback On or Off
Interface Loop Timing On or Off
Transmit Framing T1 or E1, None, or G.704
Receive Framing T1 or E1, None, or G.704
Substitute Pattern TX2047
Error Select RX2047
Transmit Coding AMI, HDB3, B8ZS
Receive Coding AMI, HDB3, B8ZS
Transmit Data Fault None, Data, AIS
Receive Data Fault None, Data, AIS
ASYNC TX Baud Rate 110 to 38400
ASYNC RX Baud Rate 110 to 38400
ASYNC TX Channel Character
Length 5, 6, 7, or 8
ASYNC RX Channel Character
Length 5, 6, 7, or 8
ASYNC TX Channel Stop Bits 1 or 2
ASYNC RX Channel Stop Bits 1 or 2
ASYNC TX Channel Parity Even, Odd, or None
ASYNC RX Channel Parity Even, Odd, or None
ASYNC TX Electrical Interface EIA-232 or EIA-485
ASYNC RX Electrical Interface EIA-232 or EIA-485
Transmit Data Phase Normal or Inverted
Receive Data Phase Normal or Inverted
CTS Time Delay 0 to 999 seconds
System
Reference Frequency Offset
Clear Stored Faults
Terminal Operation Mode
TX, RX, Duplex
System Modem Type ASYNC, EFD, or Custom
Local AUPC Mode On or Off
RTS TX-IF Control Mode On or Off
Local AUPC
Power (C-Band) +25 to + 38 dBm, in 0.1 dB steps
Power (Ku-Band K1) +17 to + 30 dBm, in 0.1 dB steps
Power (Ku-Band K3) +22 to + 35 dBm, in 0.1 dB steps
E
b
/N
0
Target 3.2 to 16.0, in 0.1 dB steps
Maximum Tracking Rate 0.5 to 6.0 dB/min, in 0.5 dB steps
Carrier Loss Action Hold, Nominal, or Maximum