Comtech EF Data C5 - Manual (Page 155)

C5/K1/K3 Integrated Satellite Terminal System Operation
Rev. 0 4–29
4.1.3.5 Configuration Save
Refer to Figure 4-8.
The Configuration Save menu allows programming of configuration parameters into
memory on the M&C. There are five memory locations that may be used to store specific
configuration setups that are used frequently.
After changing the configuration parameters to the desired settings, enter the
Configuration Save menu and select memory location 1 through 5. Press [ENTER] to
execute the save.
4.1.3.6 Configuration Recall
Refer to Figure 4-9.
The Configuration Recall menu allows the user to recall a previously saved configuration
setup. Upon entry, select memory location 1 through 5 by pressing [
$] or [%]. Press
[ENTER] to execute the recall.