Comtech EF Data C5 - Manual (Page 131)

C5/K1/K3 Integrated Satellite Terminal System Operation
Rev. 0 4–5
4.1.3 Menu System
Note: The Utility Factory Setup (Figure 4-20) menu is for EFData service personnel
only. Entering this menu without authorization may cause the modem to operate
incorrectly.
Use the Main menu Figure 4-3 as a quick reference for accessing the modem functions.
To access and execute all functions, refer to Figure 4-4 through Figure 4-19. For further
configuration details, refer to Section 4.2.
When the modem power is applied, the base level of the menu system displays the
sign-on message:
! Line 1 of the sign-on message is the modem model number and type.
! Line 2 is the version number of the firmware.
The main level of the menu system is Function Select. To access this level from the
sign-on message, press the [
" ] or [ # ] keys. From the Function Select menu; select one of
the functional categories:
! Configuration
! Monitor
! Faults/Alarms
! Stored Faults/Alarms
! Remote AUPC (ASYNC mode only)
! Utility
Press [ " ] or [ # ] to move from one selection to another. When line 2 displays the desired
function, select that level by pressing [ENTER]. After entering the appropriate functional
level, press [
" ] or [ # ] to move to the desired function.
To view or change the modem’s configuration, enter the Configuration level from the
Function Select menu. Once in the Configuration menu, press [
" ] or [ # ] to scroll through
the Configuration menu selection:
! Modulator
! Demodulator
! Interface
! Save
! Recall
Press [ENTER] to select the desired Configuration menu option. To view the options for
the selected configuration parameters, press [
" ] or [ # ]. To change a configuration
parameter, press [ENTER] to begin the change process.