Comtech EF Data C5 - Manual (Page 295)

C5/K1/K3 Integrated Satellite Terminal System Remote Control Operation
Rev. 0 B–11
Interface Coding
Format Transmit Command:
Response:
Status:
Response:
>add/ICFT_xxxx'cr''lf']
>add/ICFT_xxxx'cr''lf']
Where: xxxx = AMI, HDB3, or B8ZS.
Interface Coding
Format Receive Command:
Response:
Status:
Response:
>add/ICFR_xxxx'cr''lf']
>add/ICFR_xxxx'cr''lf']
Where: xxxx = AMI, HDB3, or B8ZS.
Transmit Data
Fault Command:
Response:
Status:
Response:
>add/TDF_xxxx'cr''lf']
>add/TDF_xxxx'cr''lf']
Where: xxxx = NONE, DATA, or AIS.
Receive Data
Fault Command:
Response:
Status:
Response:
>add/RDF_xxxx'cr''lf']
>add/RDF_xxxx'cr''lf']
Where: xxxx = NONE, DATA, or AIS.
ASYNC Transmit
Overhead Baud
Rate
(TX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/TOBR_nnnnn'cr''lf']
>add/TOBR_nnnnn'cr''lf']
Where: nnnnn = 110, 150, 300, 600, 1200, 2400,
4800, 9600, 19200, or 38400.
ASYNC Receive
Overhead Baud
Rate
(RX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/ROBR_nnnnn'cr''lf']
>add/ROBR_nnnnn'cr''lf']
Where: nnnnn = 110, 150, 300, 600, 1200, 2400,
4800, 9600, 19200, or 38400.
ASYNC Transmit
Channel
Character Length
(TX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/TCCL_n'cr''lf']
>add/TCCL_n'cr''lf']
Where: n = 5, 6, 7, or 8 (characters).
ASYNC Receive
Channel
Character Length
(RX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/RCCL_n'cr''lf']
>add/RCCL_n'cr''lf']
Where: n = 5, 6, 7, or 8 (characters).
ASYNC Transmit
Channel Stop
Bits
(TX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/TCSB_n'cr''lf']
>add/TCSB_n'cr''lf']
Where: n = 1 or 2 (stop bits).
ASYNC Receive
Channel Stop
Bits
(RX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/RCSB_n'cr''lf']
>add/RCSB_n'cr''lf']
Where: n = 1 or 2 (stop bits).
ASYNC Transmit
Overhead
Channel Parity
(TX ASYNC
Overhead only) Command:
Response:
Status:
Response:
>add/TOCP_xxxx'cr''lf']
>add/TOCP_xxxx'cr''lf']
Where: xxxx = ODD, EVEN, or NONE.