beautypg.com

Comtech EF Data C5 User Manual

Page 178

background image

Operation

C5/K1/K3 Integrated Satellite Terminal System

4–52

Rev. 0

TX DATA PHASE

TX data phase relationship. Use this option to select Normal or Invert
for the TX data relationship to the selected TX clock.

Upon entry, press [

$] or [%] to make the selection. Press [ENTER] to

execute the change.

RX DATA PHASE

RX data phase relationship. Use this option to select Normal or Invert
for the RX data relationship to the selected RX clock.

Upon entry, press [

$] or [%] to make the selection. Press [ENTER] to

execute the change.

ASYNC TX TYPE

Select EIA-232, EIA-485 for ASYNC overhead type.

Upon entry, the operational status may be changed. Press [

$] or [%] to

make the selection. Press [ENTER] to execute the change.

Note: Available only with ASYNC overhead option.

ASYNC RX TYPE

Select EIA-232 or EIA-485 for ASYNC overhead type.

Upon entry, the operational status may be changed. Press [

$] or [%] to

make the selection. Press [ENTER] to execute the change.

Note: Available only with ASYNC overhead option.

CTS DELAY

Sets the delay in seconds (0 to 60) for the Clear To Send (CTS) signal.

Upon entry, the operational status may be changed. Press [

$] or [%] to

make the selection. Press [ENTER] to execute the change.

This manual is related to the following products: