Comtech EF Data C5 - Manual (Page 309)

C5/K1/K3 Integrated Satellite Terminal System Remote Control Operation
Rev. 0 B–25
B.7 Stored Faults
Information on stored faults is returned when requested. If no stored fault exists for a
given fault number, the words “NO Fault” will be returned instead of the normal
time/date status information.
The following symbols are commonly used to define the stored faults status commands:
! #
Fault number (0 to 9). “0” is the first fault stored.
! hh
Hours in 24-hr. format.
! mm
Minutes.
! ss
Seconds.
! MM
Month.
! DD
Day.
! YY
Year.
Modulator
Stored Faults Command:
Response: >add/MSF_# hh:mm:ss MM/DD/YY'cr'
MOD_xxx'cr'
SYN_xxx'cr'
DCS_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
SCT_xxx'cr''lf']
Module (OK/FLT)
IF Synthesizer (OK/FLT)
Data Clock Synthesizer (OK/FLT)
I Channel (OK/FLT)
Q Channel (OK/FLT)
Modem Reference PLL Lock (OK/FLT)
Demodulator
Stored Faults Command:
Response: >add/DSF_# hh:mm:ss MM/DD/YY'cr'
MOD_xxx'cr'
CD_xxx'cr'
SYN_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
BERT_xxx'cr''lf']
Demod Module (OK/FLT)
Carrier Detect (OK/FLT)
IF Synthesizer Lock (OK/FLT)
I Channel (OK/FLT)
Q Channel (OK/FLT)
BER threshold (OK/FLT)
Interface
Transmit
Side Stored
Faults Command:
Response: >add/ITSF_# hh:mm:ss MM/DD/YY'cr'
TXD_xxx'cr'
PLL_xxx'cr'
CLK_xxx'cr''lf']
Transmit Data/AIS (OK/FLT)
Transmit Synthesizer PLL Lock (OK/FLT)
Selected Transmit Clock Activity (OK/FLT)
Interface
Receive Side
Stored Faults Command:
Response: >add/IRSF_# hh:mm:ss MM/DD/YY'cr'
UNFL_xxx'cr'
OVFL_xxx'cr'
RXD_xxx'cr'
FBER_xxx'cr'
CLK_xxx'cr'
PLL_xxx'cr'
DMUX_xxx'cr'
2047_xxx'cr' Lock Detect (OK/FLT)
BUFF_xxx'cr''lf']
Buffer Underflow (OK/FLT)
Buffer Overflow (OK/FLT)
Receive Data Loss/AIS (OK/FLT)
Frame BER (OK/FLT)
Selected Buffer Clock Activity (OK/FLT)
Buffer Clock PLL Lock (OK/FLT)
Demux Lock (OK/FLT)
2047 Pattern Lock Detect (OK/FLT)
Buffer Full (OK/FLT)