Comtech EF Data C5 - Manual (Page 49)

C5/K1/K3 Integrated Satellite Terminal System Specifications
Rev. 0 2–15
2.2 Ku-Band System Specifications
Refer to Table 2-10 for system specifications.
Table 2-10. Ku-Band System Specifications
Parameter Specification
Transmit Band 14.0 to 14.5 GHz
Receive Band 10.95 to 11.45 GHz
11.20 to 11.7 GHz
11.70 to 12.2 GHz
12.25 to 12.75 GHz
OMT/FEED Interface Circular Waveguide Flange (WC-75)
IDU/ODU interconnect:
TX Cable
RX Cable
50
!, N male connector (both ends)
20 dB maximum atten at 790 MHz, 2
! maximum
50
!, N male connector (both ends)
25 dB maximum atten at 950 to 1450 MHz, 2
! maximum
APS Connector Type N female with waterproof cap
DC voltage corresponding to IDU RX signal level
Data I/O Connector EIA-530. 25-pin D sub, female (EIA-422, EIA-232, V.35)
EIA-449, 37-pin D sub, female (EIA-422) Optional
EFD Standard, 50-pin D sub, female (ASYNC) Optional
V.35, 34-pin Winchester Optional
Alarm Connector Form C Contact, 9-pin D sub, female
Fault Connector Form C Contact, 9-pin D sub, female
Auxiliary Connector Open Collector, 9-pin D sub, female
Prime Power – IDU 8.5 to 264 VAC, 47 to 63 Hz, using a 6 foot (2 meter) cable 3-prong plug:
Meets EFData QUA_014 Operating Procedures
Power Consumption Total System –AC 225W maximum
K1 – 0.8W
K3 – 2.5W
Agency Compliance:
Safety
Emission
Susceptibility CE MARK – EN60950
CE MARK – EN60950
CE MARK – EN50082-1