Comtech EF Data C5 - Manual (Page 132)

Operation C5/K1/K3 Integrated Satellite Terminal System
4–6 Rev. 0
Press [ $ ] or [ % ] to change the parameters. After the display represents the correct
parameters, press [ENTER] to execute the change. This action initiates the necessary
programming by the modem.
To undo a parameter change before execution, press [CLEAR].
Notes:
1. Figure 4-4 through Figure 4-20 list the front panel menu window selections.
2. Menus or commands that are specific to certain modem configurations are only
accessible after selecting the appropriate modem configuration. This prevents
incompatible parameters from accidentally being selected.
3. All of the windows are accessible in the Custom mode. Take caution not to select
incompatible parameters, as the modem does not shut out incompatible command
choices in the Custom mode.