Comtech EF Data C5 - Manual (Page 35)

Rev. 0 2–1
2
Chapter 2
SPECIFICATIONS
The chapter provides the necessary specifications for the Satellite Terminal System.
2.1 C-Band System Specifications
Refer to Table 2-1 for the C-Band system specifications.
Table 2-1. C-Band System Specifications
Parameter Specifications
TX Band 5.925 to 6.425 GHz
RX Band 3.7 to 4.2 GHz
RF Output Connector Type N, female (on ODU)
RF Input Connector CPR229G Wave Guide (on LNA assembly)
LNA/ODU Interconnect 50
!, N male connectors – both sides
ODU/OMT Interconnect 50
!, N male connectors – both sides
0.5 dB maximum attenuation at 3.7 to 4.2 GHz
IDU/ODU Interconnect:
TX Cable
RX Cable
Two coaxial cables
50
!, N male connectors – both sides
20 dB maximum attenuation at 790 MHz, 2
! maximum
50
!, N male connectors – both sides
25 dB maximum attenuation at 950 to 1450 MHz, 2
!
maximum