Comtech EF Data C5 - Manual (Page 77)

C5/K1/K3 Integrated Satellite Terminal System Specifications
Rev. 0 2–43
2.5.2.3 V.35 Specification V.10, V.11 Specification, Circuit Supported
Refer to Table 2-24 for V.35 specifications.
Table 2-24. V.35 Specifications
V.35 Specification
Circuit Supported SD, SCT, SCTE, RD, SCR, DSR, RLSR, RTS, CTS, MC, DSR,
LL
Driver Amplitude (RD, SCR,
SCTE, CTS, RLSD, DSR)
% 0.5V-PK, % 20% differential, into 100!
Amplitude (SCT, SD, RTS, LL,
MC)
% 0.2V min into 100!
Polarity (SD, SCT, SCTE, RD,
SCR) True when B positive with respect to A
False when A positive with respect to B
Polarity (RTS, CTS, DSR,
RLSD) True when < -0.2v with respect to ground
False when > +0.2V with respect to ground
Phasing (SCTE, SCR) False-to-True transition nominally in center of data bit.
Symmetry (SCT, SCTE, SCR) 50%
% 5%
SD-A, SD-B Send Data
SCT-A, SCT-B Serial Clock Transmit
RD-A, RD-B Receive Data
SCR-A, SCR-B Serial Clock Receive
SCTE-A, SCTE-B Transmission Signal Timing
MC-A, MC-B Master Clock
RTS Request to Send
CTS Clear to Send
DSR Data Set Ready
RLSD Receive Line Signal Detect
LL Local Loopback
MF MOD Fault (ttl)
DF DEMOD Fault (ttl)
Note: All other specifications are per CCITT V.10 and V.11.