Figure 4-11. faults/alarms menu – Comtech EF Data C5 User Manual
Page 160
Operation
C5/K1/K3 Integrated Satellite Terminal System
4–34
Rev. 0
SDT5200 "TYPE"
VER: X.X.X
FUNCTION SELECT
FAULTS/ALARMS
MODULATOR
DEMODULATOR
TX INTERFACE
RX INTERFACE
COMMON
ODU
IF SYNTHESIZER
DATA CLOCK SYN
I CHANNEL
Q CHANNEL
MODEM REF PLL
MODULE
CARRIER DETECT
IF SYNTHESIZER
I CHANNEL
Q CHANNEL
BER THRESHOLD
MODULE
TX DATA/AIS
TX CLK PLL
TX CLK ACTIVITY
CONFIGURATION
BUFFER UNDERFLOW
BUFFER OVERFLOW
RX DATA/AIS
FRAME BER
BUFFER CLK PLL
BUFFER CLK ACT
DEMUX LOCK
RX 2047 LOCK
BUFFER FULL
BATTERY/CLOCK
-12 VOLT SUPPLY
+12 VOLT SUPPLY
+5 VOLT SUPPLY
CONTROLLER
INTERFACE MODULE
SELF TEST
IDU POWER SUPPLY
MODULE
COMMUNICATION
Notes:
1. A “-” indicates that no fault
or alarm exists.
2. A “+” indicates that a fault
exists, and will cause
switching in a redundant
system.
3. A reversed contrast “+”
indicates an active alarm.
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 4-11. Faults/Alarms Menu