Comtech EF Data C5 - Manual (Page 36)

Specifications C5/K1/K3 Integrated Satellite Terminal System
2–2 Rev. 0
Table 2-1. C-Band System Specifications (Continued)
Parameter Specifications
Data I/O Connector EIA-530-A, 25-pin D-sub, female (EIA-422, EIA-232, V.35)
EIA-449, 37-pin D-sub, female (EIA-422) – optional
EFD Standard, 50-pin D-sub, female – (ASYNC) – optional
V.35, 34-pin Winchester - optional
Alarm Connector Form-C Contact, 9-pin D-sub, female
Fault Connector Form-C Contact, 9-pin D-sub, female
Auxiliary Connector Open Collector, 9-pin D-sub, female
Remote Connector EIA-232 or EIA-485, 9-pin D-sub, female
Prime Power – IDU 85 to 264 VAC, 47 to 63 Hz, using a 6-foot (2-meter) cable with a
3-prong plug.
Meets EFData QUA_014 Operating Procedure.
Power Consumption:
Total System 150W maximum
Agency Compliance:
Safety
Emissions
Susceptibility CE MARK – EN60950
CE MARK – EN55022-1
CE MARK – EN50082-1