Comtech EF Data C5 - Manual (Page 190)

Operation C5/K1/K3 Integrated Satellite Terminal System
4–64 Rev. 0
MODEM SERIAL # (Status Only.)
Displays the modem serial number.
CARD #1 SERIAL # (Status Only.)
Displays the first daughter card serial number.
CARD #2 SERIAL # (Status Only.)
Displays the second daughter card serial number.
CARD #3 SERIAL # (Status Only.)
Displays the third daughter card serial number.
CONFIGURATION
CODE - MODE EFData-supplied code.
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
"] or [#] to move the flashing cursor. Press [$] or [%] to increment or
decrement the digit at the flashing cursor. Press [ENTER] to execute the change.
Entering this code enables the corresponding modem option. To purchase an option, contact
an EFData Customer Support for more information.
CONFIGURATION
CODE - CARD #1 Provides the means to enter modem-specific code necessary to access certain options. Refer
to Appendix A for more information.
Note: Displays only when daughter card is installed.
CONFIGURATION
CODE - CARD #2 Provides the means to enter modem-specific code necessary to access certain options. Refer
to Appendix A for more information.
Note: Displays only when second daughter card is installed.
CONFIGURATION
CODE - CARD #3 Provides the means to enter modem-specific code necessary to access certain options. Refer
to Appendix A for more information.
Note: Displays only when third daughter card is installed.