Comtech EF Data C5 - Manual (Page 330)

Index C5/K1/K3 Integrated Satellite Terminal System
i–2 Rev. 0
Demodulator IF Input Shape, 4–35
Demodulator Specifications, 2–12, 2–25, 5-11
Demultiplexer Operation, 5-11
DEMUX Operation, 2–10, 2–23, A–11
Descrambling Types, A–11
Description, 1–8, 2–11, 2–24, 3–2, 3–4, 4–71, B–27, B–28,
B–29, B–30, B–31, B–32, B–33, B–34
Device Address, 2–11, 2–24, B–2, B–3
Digital Data Rate, B–2, B–3
Dimensional Envelopes, 2–5, 2–10, 2–18, 2–23, 2–48
Doppler, 4–18, 4–75, 4–77, 4–78, 4–80, A–7, A–11, A–12
Doppler Buffer Clock Source, 2–39, 2–40, 4–18, 4–75,
4–77, 4–78, 4–80, A–7, A–11, A–12
EFD Closed Network Operation, 4–68
EIA-232 Specification, 4–68
EIA-232, EIA-422, or V.35 Master/Slave, 4–71
EIA-422, or V.35 Master/Master, 4–72
End Character, 2–44, B–4
Equipment Inspection, 3–2
External IDU Connections, 3–2, 3–15
FAST Accessible Options, A–1
FAST Options, A–1, A–2
FAST System Theory, A–1, A–2
Fault Connector and Pinouts (J7), 3–18, A–2
Fault Isolation, 3–18, 6-9
Faults Monitored, 2–41
Faults/Alarms, 4–2, 4–5, 4–33, 4–34, 4–38, 4–39, 6-9, 6-13
Faults/Alarms Analysis, 4–2, 4–5, 4–33, 4–34, 4–38, 4–39,
6-9, 6-13
Faults/Alarms Display, 6-13
Frame/Multiframe Length, 4–80, 6-13
Front Panel, 4–1, 4–3, 4–57, 4–69, 4–70
Front Panel Keypad, 4–1, 4–3, 4–57, 4–62, 4–69, 4–70,
A–14
G.703, 4–21, 4–51, 4–69, A–14, B–32
Ground Connector (GND), 3–30, A–14
Hardware Upgrades, A–1
IBS, A–1
IDU Custom Modem Defaults, 5-5
IDU Installation, 3–6, 3–30
IDU Receive Specification, 3–6, 3–7
IDU–ODU Interconnections, 2–52
Implementation, A–2
Included Parts, 3–2, A–2
Indoor Unit (IDU), 1–8, 1–9
Initial Defaults, 3–2
Installation, 3–2, 3–6, 3–7, 3–13, 3–15
INTELSAT Viterbi with Reed-Solomon Codec BER, A–2
Interface, 3–2, 3–6, 3–7, 3–8, 3–10, 3–15, 3–19, 3–24,
3–25, 3–26, 4–5, 4–16, 4–17, 4–18, 4–19, 4–20, 4–33,
4–35, 4–36, 4–39, 4–43, 4–49, 4–50, 4–51, 4–67, 4–69,
4–70, 4–81, 4–82, 4–83, 5-2, 5-5, 5-13, 5-14, 6-9, 6-16,
6-17, 6-19, A–6, A–7, A–10, A–13, A–14, A–17, A–18,
A–19, A–21, A–38, A–39, B–9, B–27, B–30, B–31
Interface Options, 6-2
Interleaver (Reed-Solomon Codec), 2–38
K2 System, 3–1, 3–2, 3–3, 3–6, 3–9, 3–11, 5-1
K2 System Installation, 3–2, 3–6
Ku-Band (IDU-ODU) Interconnections (CP1, CP2, CP3),
3–13
Ku-Band ODU Installation, 2–18
Ku-Band Outdoor Unit (ODU), 3–11, 3–12
Ku-Band Outdoor Unit Dimensional Envelope, 1–11
Ku-Band Receiver Specifications, 2–23
Ku-Band System Specifications, 2–62
Ku-Band Transmit (TX), 2–15
LED Indicators, 2–16, 4–2
LNB Installation, 3–15
Loop Timing Operation, A–12
Loopback Modes, A–12
Loopback Modes2–41, 2–46
Menu System, 1–12, 4–5
Message Structure, B–1
Modem Feature Upgrade (FAST), B–1
Modem Types, 4–68
Modes of Operation, 4–68
Modulation and Encoding Types, 2–8, 2–21
Modulator, 4–5, 4–8, 4–9, 4–33, 4–35, 4–39, 4–43, 4–44,
4–45, 4–69, 5-6, 5-7, 5-8, B–5, B–28, B–31
Modulator Checkout, 1–3, 1–9, 2–3, 2–4, 2–9, 2–16, 2–22,
2–41, 3–18, 3–23, 4–5, 4–8, 4–9, 4–33, 4–35, 4–39,
4–43, 4–44, 4–45, 4–69, 4–70, 4–81, 4–82, 5-6, 5-7, 5-8,
6-3, 6-6, 6-9, 6-13, 6-14, A–21, A–29, A–30, B–5, B–6,
B–15, B–17, B–21, B–23, B–25, B–28, B–31, B–35
Modulator Faults, 4–35, 6-14
Modulator Specifications, 4–35, 5-7
Modulator-Related Specifications, 2–9, 2–22, B–6, B–17,
B–31
Monitor, 2–9, 2–22, 4–2, 4–5, 4–30, 4–31, 4–41, 4–70,
4–71, 5-2, A–7, A–13, B–6, B–17, B–31
Monitor and Control (M&C), 1–9, 2–47, 3–15, 4–2, 4–5,
4–30, 4–31, 4–40, 4–41, 4–70, 4–71, 5-2, A–7, A–13,
A–14, B–21, B–26, B–36, B–38
Monitored Signals, 1–9, 5-2
MUX Operation, A–11, B–2
MUX PCB Configuration Commands (MUX PCB Installed
Only), A–11
ODU Faults, 6-6
ODU Installation, 3–13
Options, 3–8, 3–10, 3–11, 3–12
Outdoor Unit (ODU), 1–8, 5-1
Output VSWR, 1–4, 1–5, 1–8, 1–10, 1–11, 2–54, 2–56,
2–61, 2–62, 4–36, 5-1, 6-9, B–22, B–26, B–37
Overview, 1–1
Performance with Noise and Viterbi Decoder, 1–1
Performance with Noise, 56 kbit/s, and Sequential Decoder
(Optional), 2–34, 2–35
Phase Noise, 2–30
Plesiochronous, 4–75, 4–79, 4–80
Power Entry, 2–40, 4–75, 4–79, 4–80
QPSK Encoding, 5-9
Receive, 4–2, 4–33, 4–36, 4–39, 4–49, B–27, B–30, B–31,
B–34
Receive Clock Jitter, 5-9
Receive Clock Switching Due to Failure of Selected Clock,
2–40
Receive Doppler/Plesiochronous Buffer, 2–40
Receive IF Carrier Acquisition Range, 1–13, 2–12, 2–25,
2–48
Receive Interface Faults, 2–12, 2–25, 4–36, 6-17
Receiver Faults, 2–3, 2–53
Reed-Solomon Codec, 2–17, 6-15