Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 92)

5Ć36 AutoMax Programming Executive Version 3.x
Start
Run the AutoMax
Programming Executive
Connect the cable between the perĆ
sonal computer & Processor
Select Load OS
AutoMax Exec. determines compleĆ
ment of Processors, UDCs and NetĆ
work modules in rack.
AutoMax OS
already loaded to
Processors?
Network module
in the Racks?
Load OS
Direct or Network?
Enter the slot # in the local rack that
contains the Network modules.
Enter the drop # of the target rack
UDC module(s)
in the rack?
Load OSs
AutoMax, UDC, or Both
A
6010 (M/N 5757430A) or
6011 (M/N 57C431)
in rack
Select AutoMax OS or Ethernet OS
Enter password if Processors
already have OS
AutoMax Exec. loads the selected
OS to Processors
7010 (M/N57C435)
Processor(s) in Rack?
UDC modules in
Rack?
Load UDC OSs?
Press any key to return to the
Commands menu
Load UDC OS to specific slot
in rack or All slots
If you are loading
to specific UDC's.
Load another?
A
AutoMax Exec. loads the 7010 OS
to M/N 57C435
AutoMax Exec. displays compleĆ
ment of UDC modules
Enter the slot # of target UDC
module
Select OS type for UDC(s) from
displayed list
AutoMax Exec. loads selected
UDC OS(s)
End
B
U
Yes
No
N
Yes
Yes
No
D
No
B
No
Yes
Yes
No
No
No
Yes
Yes
S
Yes
A or B
A
No
Figure 5.15 Ć Load Operating System