Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 User Manual
Page 2
![background image](/manuals/580826/2/background.png)
E1998 Rockwell International Corporation.
Ethernett is a trademark of Xerox Corporation.
Microsoftt, Windowst, OS/2t and MSĆDOSt are trademarks of Microsoft.
The Norton Editort is a trademark of Peter Norton Computing.
Kermitt is a trademark of the trustees of Columbia University.
Multibust is a trademark of Intel.
dBASE IIIt is a trademark of AshtonĆTate.
Sidekickt is a trademark of Borland International.
VAXt and VMSt are trademarks of Digital Equipment Corporation.
Reliancet, AutoMatet, Sharkt, and AutoMaxt, ReSourcet and RĆNett are
trademarks of Rockwell Automation.
The information in this user's manual is subject to change without notice.
DANGER
ONLY QUALIFIED ELECTRICAL PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS EQUIPMENT AND THE HAZARDS
INVOLVED SHOULD INSTALL, ADJUST, OPERATE, OR SERVICE THIS
EQUIPMENT. READ AND UNDERSTAND THIS MANUAL AND OTHER
APPLICABLE MANUALS IN THEIR ENTIRETY BEFORE PROCEEDING. FAILURE
TO OBSERVE THIS PRECAUTION COULD RESULT IN SEVERE BODILY INJURY
OR LOSS OF LIFE.
WARNING
THE USER MUST PROVIDE AN EXTERNAL, HARDWIRED EMERGENCY STOP
CIRCUIT OUTSIDE THE CONTROLLER CIRCUITRY. THIS CIRCUIT MUST
DISABLE THE SYSTEM IN CASE OF IMPROPER OPERATION. UNCONTROLLED
MACHINE OPERATION MAY RESULT IF THIS PROCEDURE IS NOT FOLLOWED.
FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN BODILY INJURY.