Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 200)

18Ć12 AutoMax Programming Executive Version 3.x
ON LINE direct ăăăăăC: \LIB\SYS\RACK
Monitor I/O
# Loc Slot Drop Rem Slot Register Value
EscăExit
F1 Help
Display Clear Modify
Save Recall
Path
Files Locate
Figure 18.5 Ć Monitor I/O Menu
18.2.1 Monitor I/O Screen Display
The lower portion of the Monitor I/O screen display, which is
updated continually, includes the following fields:
(#) Ć Display number (screen position).
Local Slot Ć The slot (0Ć15) in the local chassis containing the
I/Oăcard to be monitored. If the card to be
monitored is in a remote chassis, this is the slot
number of the Remote I/O Master to which the
remote chassis is connected.
Drop Ć The drop number (1Ć7) of the remote chassis that
contains the card to be monitored. If the card to be
monitored is in a local chassis, this field is blank.
Remote Slot Ć The slot (0Ć15) in the remote chassis containing the
I/O card to be monitored. If the card to be
monitored is in a local chassis, this field is blank.
Register Ć The register (0Ć32767) on the I/O card to be
monitored.
Value Ć The current value of the I/O register. The value is
updated in real time. I/O registers may be
displayed in either binary format (1s and 0s),
decimal format (range: Ć 32768 to +32767), or
hexadecimal format (range: 0 Ć FFFF).