Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 16)

1Ć2 AutoMax Programming Executive Version 3.x
D Section 2.0 Ć Introduction to the AutoMax Distributed Control
System Ć Contains a general description of the AutoMax
distributed control system and an overview of the AutoMax
Programming Executive.
D Section 3.0 Ć Installing the AutoMax Software Ć Provides
instructions for installing the AutoMax Programming Executive
software and the Windows software. Also provides instructions for
installing a mouse.
D Section 4.0 Ć Getting Around in Windows and AutoMax Ć Describes
Windows functionality as it relates to AutoMax V3, Programming
Executive file types and storage, and the text editor and PC editor
used by AutoMax.
D Section 5.0 Ć Using the System Configurator Ć Describes the
System Configurator, which is used to organize systems, sections,
and racks. Contains procedures for executing commands from
the system, section, and rack menus; procedures for loading the
operating system to the rack; procedures for importing tasks
created with previous versions of AutoMax and ASD; and
procedures for setting up your Windows and AutoMax software.
D Section 6.0 Ć Configuring Racks Ć Describes the Rack
Configurator, which is used to add modules to a rack and work
with modules in existing racks.
D Section 7.0 Ć Configuring I/O and Common Memory Locations Ć
Explains how to configure I/O points on a module.
D Section 8.0 Ć Using the Task Manager Ć Describes procedures for
creating and working with application tasks. Also describes how to
access online menu functions.
D Section 9.0 Ć System Security Ć Describes online security features
and methods for setting and changing passwords.
D Section 10.0 Ć AutoMax Processor Overview Ć Describes the
AutoMax Processor module and online operation of the AutoMax
distributed control system.
D Section 11.0 Ć AutoMax ON LINE Menu Ć Describes how to load,
run, stop, monitor, and modify application tasks in the rack. Also
describes AutoMax and Universal Drive Controller Processor error
logs.
D Section 12.0 Ć ON LINE Menu: Connect Ć Describes how to
change the baud rate, enter/release the password, and enable
and disable AUTO RUN of application tasks.
D Section 13.0 Ć ON LINE Menu: Info/Log Ć Describes how to display
information about the system software on any AutoMax Processor
or Universal Drive Controller in the rack and how to view the status
and error log for tasks.
D Section 14.0 Ć ON LINE Menu: Transfer Ć Describes procedures for
changing the default path or viewing the contents of the default
system. Also contains procedures for loading tasks onto the rack
and saving application tasks from the rack.
D Section 15.0 Ć ON LINE Menu: Running Tasks Ć Describes how to
run tasks.
D Section 16.0 Ć ON LINE Menu: Stopping Tasks Ć Describes how to
stop tasks.