Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 208)

18Ć20 AutoMax Programming Executive Version 3.x
Esc Exit Task Stopped
C:\LIB\SYS\RACK ON LINE direct Monitor PC
Task: PCTASK3 Seq. No. 50 Desc: COUNTER TEST
ctr
OUT IN
COUNTER
PN:S1PCI
PV:ăăăă50
CN:ctr_current
CV:ăăăăă0
(ăăă)
ton
DOWN
RESET
1
tof
Key F1Help F2Srch F3Cmds F4ĆĆĆĆĆ F5ĆĆĆĆĆ F6ĆĆĆĆĆ F7ĆĆĆĆĆ F8ĆĆĆĆĆ F9ĆĆĆĆ F10Find
Alt ăăRmkăăă Next ăăĆĆĆĆ ăăĆĆĆĆĆăă ĆĆĆĆĆ ăăĆĆĆĆĆăăăĆĆĆĆĆ ăăĆĆĆĆ ăăăĆĆĆĆ ăăăĆĆĆĆ
Figure 18.6 Ć Sample Monitor PC Display
While monitoring a sequence, you can use the four arrow keys to
position the cursor over any element in the sequence. If there is a
description for the selected element, it will be displayed on the
screen in the field Desc".
While you are in the PC Monitor, the following keys have the special
functions indicated.
Home Displays the first sequence in the task
PgUp Displays the previous sequence in the task
PgDn Displays the next sequence in the task
End Displays the last sequence in the task