Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 142)

8Ć14 AutoMax Programming Executive Version 3.x
once testing is complete and you connect all field wiring to the rack,
you must reĆload the configuration without the option.
8.16.3.2 Generating the Drive Parameter Files
The Generate Configuration command can be used to create the
drive parameter object files (.POB) for all UDCs in the rack. To create
the drive parameter files, choose the Generate Drive Parameter Files
option. A file named PARAMXX.POB will be created, where XX is the
slot number of the UDC module. The drive parameters must be
loaded onto the UDC(s) in the rack before or at the same time UDC
application tasks are loaded. See 14.3 for information about loading
the drive parameter files.
You can print the drive parameters for a UDC module by using the
Print command from the Rack menu in the System Configurator.
8.17 On_Line! Command: Accessing Online
Functions
This command is used to access the online functions. It is the same
as the On_Line! command in the System Configurator. See
section 5.6 for more information.