Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 169)

12Ć7 On Line Menu: Connect
ON LINE direct C\:
EscăExit
Connect Network
Slot No. 08
Enter Terminate Entry
Drop No 01 05
Figure 12.3 Ć ON LINE CONNECT NETWORK Menu (Select Network Rack)
From the screen shown in figure 12.3, select the rack (drop) number
on the network. The drop numbers available are shown in blocks of
15. You can use the PgUp and PgDn keys to see other blocks of
drops, if applicable. Enter the drop number you wish to connect to
and . From this point until you change your connection
through the ON LINE CONNECT menu again, all communications will
take place with the network drop chosen. The top line of most
ON LINE screens will display the drop number of the rack with which
the personal computer is communicating.
12.6 Displaying the Network Connection Table
Up to four users can be connected to the same AutoMax rack over
the network. Typing U" for Userlist" from the Connect menu shown
in figure 12.1 allows you to display the Network User List. The
Network User List displays users who are connected to the network.
See figure 12.4.