Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 171)

13Ć1 On Line Menu: Info/Log
13.0 ON LINE MENU: INFO/LOG
Entering I" for Info/Log from the ON LINE menu allows you to
display information about the system software on any AutoMax
Processor or UDC module in the rack or to view the status and error
log, if any, for a selected task.
13.1 Info/Log Processor and UDC Information
Display
If you select Info/Log without having selected a task by using the
Enter key or , AutoMax will assume you want to display
information about an AutoMax Processor and the Common Memory
module (M/N 57C413B or 57C423) or a UDC module. You will be
prompted for the slot number of the AutoMax Processor or UDC
module of interest.
AutoMax Processor
Figure 13.1 shows a sample display for an AutoMax Processor in
slot 1 with no Common Memory module.
ON LINE direct AUTOMAX C: \LIB\SYS\RACK
EscăExit
Info/Log
Control Processor Information for Slot 1
Software ID: 422526Ć001C STD
Clock Tick (micro sec): 5500
CPU Utilization: 34%
Memory Memory Largest
Used Free Free Block Battery
PROCESSOR 2924 151280 151280 Replace
COMMON N/A N/A N/A N/A
Figure 13.1 Ć Info/Log Processor Information Display