Rockwell Automation 825-P Modular Protection System for Motors User Manual - Manual (Page 248)

248 Rockwell Automation Publication 825-UM004D-EN-P - April 2012
Chapter E DeviceNet Information
Instance 103 is the 825 Current Input (produced) assembly.
Instance 104 is the 825 Misc. Input (produced) assembly.
This is a “Read Only” status assembly.
This is a “Read Only” status assembly.
Instance 103 825 Current
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Warning Tripped
1 % Thermal Capacity Used
2 Average 3 Phase Current (low)
3 Average 3 Phase Current (high)
4 % Asymmetry
Instance 104 825 Phase Current
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Warning Tripped
1 % Thermal Capacity Used
2 Average 3 Phase Current (low)
3 Average 3 Phase Current (high)
4 % Asymmetry
5 Max value of all Temperature sensors
6 Earth Current (low)
7 Earth Current (high)
Instance 180 Hardware Inputs 1-6
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Input 8 Input 7 Input 6 Input 5 Input 4 Input 3 Input 2 Input 1
1
Instance 184 Produced Network Outputs 1-15
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Net Out 8 Net Out 7 Net Out 6 Net Out 5 Net Out 4 Net Out 3 Net Out 2 Net Out 1
1 Net Out 16 Net Out 15 Net Out 14 Net Out 13 Net Out 12 Net Out 11 Net Out 10 Net Out 9