Rockwell Automation 825-P Modular Protection System for Motors User Manual - Manual (Page 111)

Rockwell Automation Publication 825-UM004D-EN-P - November 2012 111
Analyzing Events Chapter 8
Example Reports Event Summary Report
The example event summary report in Figure 36 corresponds to the example
Serialized Events Recording (SER) report in Figure 37.
Figure 36 - Example Event Summary Report
=>SUM
825-P Modular Date: 06/07/2003 Time:
14:50:06:032
Prot. System
Event #: 1 Event: No Trip
Event Date: 06/07/2003 Event Time: 14:39:47:907
L1 L2 L3 RES CB
CURRENT MAG (A): 259.7 191.6 190.6 0.1 68.2
VAN VBN VCN VG
VOLTAGE MAG L-N (V): 458 460 457 456
Serialized Events Recording (SER) Report
The example SER report in Figure 37 includes records of events that occurred
before the beginning of the event summary report in Figure 36. The SER event
report rows are explained in Table 50, numbered in correspondence to the Item #
column.
Figure 37 - Example SER Report
=> SER
825-P Modular Date: 07/07/2003 Time: 14:50:04.744
Prot. System
FID=825-Modular xxxx-Vxxxx-Zxxxxxx-Dxxxxxxxxx
# DATE TIME ELEMENT STATE
11 06/07/2003 14:34:32.786 STOPPED Deasserted
10 06/07/2003 14:34:32.786 STARTING Asserted
9 06/07/2003 14:34:42.795 RUNNING Asserted
8 06/07/2003 14:34:42.795 STARTING Deasserted
7 06/07/2003 14:39:45.398 AMBALRM Asserted
6 06/07/2003 14:39:47.907 AMBTRIP Asserted
5 06/07/2003 14:39:47.907 TRIP Asserted
4 06/07/2003 14:39:48.007 AMBTRIP Deasserted
3 06/07/2003 14:39:48.007 AMBALRM Deasserted
2 06/07/2003 14:39:48.028 STOPPED Asserted
1 06/07/2003 14:39:48.028 RUNNING Deasserted