0x0e, 0x05, Get_attribute_single – Rockwell Automation 825-P Modular Protection System for Motors User Manual User Manual
Page 244: Reset, Message router - class code 0x0002, Devicenet object - class code 0x0003, Revision, Uint, Get/set
![background image](/manuals/577516/244/background.png)
244
Rockwell Automation Publication 825-UM004D-EN-P - April 2012
Chapter E DeviceNet Information
The following common services are implemented for the Identity Object:
Message Router - CLASS
CODE 0x0002
No class or instance attributes are supported. The message router object exists
only to rout explicit messages to other objects.
DeviceNet Object - CLASS
CODE 0x0003
The following class attributes are supported for the DeviceNet Object:
Only Instance 1 of the DeviceNet Object is supported. The following instance
attributes are supported:
**
Allocation_byte Bit 0 Explicit messaging
Bit 1 Polled I/O
Bit 4 COS I/O
Bit 5 Cyclic I/O
Bit 6 Acknowledge Suppression
The following services are implemented for the DeviceNet Object:
Service Code
Implemented for:
Service Name
Class
Instance
0x0E
No
Yes
Get_Attribute_Single
0x05
No
Yes
Reset
Attribute ID
Access Rule
Name
Data Type
Value
1
Get
Revision
UINT
2
Attribute ID
Access Rule
Name
Data Type
Value
1
Get/Set
Node Address
USINT
0-63
2
Get/Set
Baud Rate
USINT
0=125K
1=250K
2=500K
5
Get
Allocation Info
Allocation Choice
Master Node Addr
Structure of
BYTE
USINT
Allocation_byte**
0-63 = address
255 = unallocated
8
Get
MAC ID Switch Value
USINT
0-63