Lenze EVS9332xP - Manual (Page 442)

Appendix
Index
13
13.2
l
13.2−4 EDSVS9332P EN 5.0−07/2013
Monitoring, 8.2−1
− bus off, 8.2−3
− Current load of controller, Ixt monitoring, 8.2−5
− current load of the motor, I2 x t monitoring, 2.2−1, 8.2−7
− DC−bus voltage, 8.2−11
− Earth fault in motor cable (OC2), 8.2−4
− Exceeding of the maximum speed (NMAX), 8.2−4
− External error (EEr), 8.2−11
− Failure of a motor phase (LP1), 8.2−4
− Heatsink temperature, 8.2−10
− Monitoring times for process data input objects, 8.2−3
− motor cable overcurrent (OC1), 8.2−4
− motor temperature, 8.2−6
− reset node, 8.2−3
− responses, 8.2−1
FAIL−QSP, 8.2−1
message, 8.2−1
TRIP, 8.2−1
warning, 8.2−1
Monitoring functions
− Motor temperature, 2.2−1
− Overview, 8.31
− responses, 8.2−1
Monitoring times for process data input objects, 8.2−3
Monitorings
− configuration, 8.31
− possible fault responses, 8.31
Motor, thermal monitoring, with PTC thermistor, 6.5−12,
6.5−13
motor, Thermal monitoring, Sensorless, 2.2−1
Motor cable, 5.2−8, 5.3−1
− Cable cross−section, 5.2−9
− for trailing cable, 5.2−9
− Influence of the length, 5.2−8
− length, 3.1−2
− max. length, 5.2−7
− permanently installed, 5.2−9
− permissible length, 5.2−8
− Specification, 5.2−8
Motor cable overcurrent (OC1), 8.2−4
Motor connection, 3.1−2
Motor monitoring, 2.2−1
Motor potentiometer, 8.5−14
Motor protection, 2.3−2
Motor stator resistance, 8.5−6
Motor temperature, monitoring, 8.2−6
Mounting conditions
− Dimensions, 3.1−2
− Free spaces, 3.1−2
− Mounting place, 3.1−2
− Mounting position, 3.1−2
− Weights, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
N
Nameplate, 1.1−3
Network of several drives, Function, 10.1−1
Noise−optimised operation, 8.5−3
O
Operating conditions, 3.1−1, 7.2−1
− Ambient conditions
Climatic, 3.1−1
Mechanical, 3.1−2
− ambient conditions, electrical, 3.1−2
− Mounting conditions
Dimensions, 3.1−2
Free space, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
Weight, 3.1−2
Operating mode of the motor control, 8.5−2
Operating status, display, 9.2−1
Operation, at earth−leakage circuit breaker, 5.2−3
Operation on public supply systems, EN 61000−3−2, 5.2−1
Optimisation of the controller and mains load, 5.2−5
Output signals
− Analog, Configuration, 6.9−4
− Digital, Configuration, 6.9−2
Outputs
− Analog, 6.9−4
− Digital, 6.9−2
Overview, Accessories, 12−1
Overvoltage threshold, DC−bus voltage, 8.2−11
P
Parameter sets, Management, 6.12−1
Parameter setting, 7−1
− code, 7.1−1
− with bus system, 7.1−2
− With XT EMZ9371BC keypad, 7.2−1