Lenze EVS9332xP - Manual (Page 267)

Configuration
Code table
8
8.4
l
8.5−1 EDSVS9332P EN 5.0−07/2013
8.4 Code table
How to read the code table
Column Abbreviation Meaning
Code Cxxxx Code Cxxxx l Parameter value of the code can be defined
differently for each parameter set
l Parameter value is accepted immediately (ONLINE)
1 Subcode 1 of Cxxxx
2 Subcode 2 of Cxxxx
v Changed parameter of code or subcode is accepted after pressing T V
s Changed parameter of code or subcode is accepted after pressing T V when
the controller is inhibited
Designation Designation of the code
Lenze Lenze setting (value at delivery or after restoring the delivery status with C0002)
à The column "IMPORTANT" contains additional information
g The code only displays a value. It cannot be configured.
Selection 1 {%} 99 Min. value {unit} max. value
IMPORTANT − Short, important explanation
8.5 Basic configurations
Code Possible settings IMPORTANT
No. Designation Lenze Selection
C0002
s
PAR LOAD 0 Load parameter set
0 Default setting Recover Lenze setting
1 Load PS Load and activate parameter
set saved in the controller
l Parameter set is loaded
automatically after every
mains connection
11 Load PS 1 externally Load parameter set from the
keypad to the controller and
activate it
20 Load PS externally Load all parameter sets from
the keypad to the EEPROM of
the controller
l The current parameter set in
the RAM of the controller is
overwritten. Save the
parameter set
C0003 PAR SAVE 0 Save parameter set
0 Executed Saving completed
1 Save PS 1 Save the parameters loaded in
the controller in the parameter
set selected
11 Save externally Transfer parameter set to the
keypad
C0004 OP DISPLAY 56 0 {1} 1999 Status display
Keypad shows selected code in
the operating level if no other
status messages from C0183
are active