Lenze EVS9332xP - Manual (Page 206)

Commissioning
Travel profile parameters
Structure of the travel profile
6
6.11
6.11.2
l
6.11−2 EDSVS9332P EN 5.0−07/2013
6.11.2 Structure of the travel profile
t
v
PS 01 PS 02 PS 03
K35.0127
Fig. 6.11−2 Travel profile: Example of a point−to−point positioning
PS01, PS02,
PS03 For the travel profile in Fig. 6.11−2 three program sets (PS) are
required for entering all parameters.
ƒ Create a travel profile of your drive task, e.g. as shown in Fig. 6.11−2 or
Fig. 6.11−3.
ƒ The parameter data for the travel profile are saved in program sets (PS).
ƒ For more complex travel profiles, generate a positioning program with
several PS (e.g. for different travelling speeds).
ƒ The PS are parameterised in the "Positioning program" dialog box.
– The sequence of the input is determined. (
¶ 6.11−4)
– Complex positioning processes are divided into individual sections
(program sets).
ƒ Every program set can be called up as often as required without further
programming effort.
ƒ A total of 32 program sets is available.