INFICON IC/5 Thin Film Deposition Controller - Manual (Page 60)

3 - 8
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
3.3.1 Display Navigation via the MENU TREE
Press the MENU key on the front panel to access the MENU TREE.
(See
Figure 3-5 .)
Figure 3-5 Menu Display
During the MENU TREE display, the “F” keys (softkeys) will function as explained
in
Table 3-1 .
Table 3-1 F Key Functionality
Key Function Description
F1 Show 1 level To view only the top level branches,
press function key F1.
F2 Show 2 levels To view the top two level branches,
press function key F2.
F3 Show 3 levels To view the top three level branches,
press function key F3.
F4 Show 4 levels To view all the branches, press function key F4.
F6 Operate To move to the OPERATE display, (see Figure 3-6 on page
3-10 ) press function key F6.
The Cursor keys are used to move the cursor along the MENU TREE.

Up arrow Moves the cursor up one line

Down arrow Moves the cursor down one line

Left arrow Moves the cursor up one page

Right arrow Moves the cursor down one page