INFICON IC/5 Thin Film Deposition Controller - Manual (Page 53)

3 - 1
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
Chapter 3
Operation
3.1 Front Panel Controls
Operational controls for the IC/5 are located on the front panel of the instrument,
as depicted in
Figure 3-1 .
Figure 3-1 IC/5 Front Panel
1 CRT Screen
Provides graphical displays, set-up menus, status and error messages.
2 Function Keys
An array of function keys are located adjacent to the screen. These keys are
labeled F1 through F6. They are used to select displays or menu items. Their
function is indicated on the display and is described in subsequent sections.
3 Data Entry Keys
A keypad array with numerics 0 through 9 and keys for Yes (Y), No (N), Enter
(E), Clear (C), Print, and Menu used for selection and parameter entry. All
numeric and Yes/No entries need to be followed by Enter. Clear is used to
erase data entry errors. If an illegal value has been entered, Clear will erase the
error message and re-display the last valid data. The Print Screen key is used
to send the display information to the floppy drive. The Menu key is used to
navigate through the instrument’s displays.
1 2 3 4 5
6 7 8 9 10