Lull 944E-42 Service Manual - Manual (Page 133)

4.29 Model 644E-42/944E-42 Rev. 6/04
Cab and Covers
4. Block (7) the boom sufficiently enough to provide
access to the hydraulic hoses between the cab,
hydraulic valve plate and the engine compartment.
5. Label, disconnect and plug the hydraulic hoses
leaving the cab and going to the hydraulic cylinders,
brakes and engine compartment. All of the hoses
may be accessed either above (8) or below (9) the
frame.
6. Disconnect the supply and return fuel lines (10) at
the fuel tank (11). (See Section 7.8.2, “Fuel Tank.”)
7. Disconnect the electrical connection to the fuel level
sending unit (12).
8. Remove the right side console access panel (13).
Note: Record the location, and label all electrical cables
to ensure correct installation
9. Disconnect all of the electrical connections (14) that
run from the cab out to the frame and engine
compartment.
MU4880
7
8
9
MU5010
10
11
12
MU3880
~
13
MU4890
14