Konica Minolta Printgroove - Manual (Page 93)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-22
Finishing Settings
Finishing Settings has three sub-menus:
1. Paper
Binding The Binding setting for the print job appears in the drop-down
menu. By default, [Auto] is selected. You may change the selec-
tion. All available options are selectable from the drop-down
menu.
Saddle Stitch If the checkbox is selected, the option is active. You may de-se-
lect the checkbox.
Trim If the checkbox is selected, the option is active. You may de-se-
lect the checkbox.
Staple If the checkbox is selected, the option is active. The Staple setting
for the print job appears in the drop-down menu. You may change
the selection. All available options are selectable from the drop-
down menu. Available values change based upon the selected
Binding Position value.
Punch If the checkbox is selected, the option is active. The Punch setting
for the print job appears in the drop-down menu. You may change
the selection. All available options are selectable from the drop-
down menu.
Folding If the checkbox is selected, the option is active. The Folding set-
ting for the print job appears in the drop-down menu. You may
change the selection. All available options are selectable from the
drop-down menu. If no value is selected, the default value is Off.