Konica Minolta Printgroove - Manual (Page 15)

Introduction 1
Printgroove POD Queue 1-10
!
Detail
For a model type whose “Support Type” is “Full”, all of the Setting Op-
tions of the Job Ticket of the Printgroove POD Queue are supported.
1.7 Job Audit Support
The following printers support Printgroove POD Queue’s Job Audit feature.
Default User Name and Password values are also provided:
Konica Minolta bizhub Pro 2500P Smart Imager R11 Limited 2500P
Konica Minolta bizhub Pro 2000P Smart Imager R11 Limited 2000P
Konica Minolta bizhub Pro 1600P Smart Imager R11 Limited 1600P
Xerox DocuTech 6100 series DocuSP 4.x Limited DocuTech61XX
MicroPress
Server 7.5 bizhub Pro 1050, bizhub
Pro 920, bizhub Pro 5500,
bizhub Pro 6500.
NOTE: MicroPress sup-
ports both 5500 and 6500
but does not make a dis-
tinction between the en-
gines. In MicroPress, all
models in this series are
referred to as 6565KM. each model supports
the same controllers
noted above Limited MICROPRESS7.
5
Model Controller Default User
Name Default Pass-
word
bizhub Pro 920 IC-203 NA NA
bizhub Pro 1050 embedded NA NA
bizhub Pro C5500 IC-305 (version 2.0), IC-
408 admin Fiery.1
bizhub Pro C6500 IC-303, IC-305, IC-408 admin Fiery.1
bizhub Pro C6501 IC-305 8(version 2.0) +
latest firmware admin Fiery.1
Manufacturer Model Controller Sup-
port
Type GUI Display Val-
ue