Konica Minolta Printgroove User Manual

Page 89

Printgroove POD Queue Tools

Printgroove POD Queue

5-18

6. Output Method

All five

Output

options are listed. Click the radio button to select the option.

An explanation of each follows.

Paper Color

The [Paper Color] selected for the print job appears in the drop-
down menu. All available options are selectable from the drop-
down menu. You may change the selection.

Paper Name

[Paper Name] is a value assigned outside of Printgroove POD
Queue. If a job enters Printgroove POD Queue with this value set,
Printgroove POD Queue does the following:
• Reads the [Paper Name] values for [Paper Size], [Paper

Weight], [Paper Color] and [Paper Type].

• Sets these values in the Printgroove POD Queue Job Ticket

and grays out the values in the Job Ticket Editor

• Displays the [Paper Name] value in the [Paper Name] field of the

Job Ticket Editor.

As long as a [Paper Name] values appears in the [Paper Name]
field, the [Paper Size], [Paper Weight], [Paper Color] and [Paper
Type] fields cannot be modified in the Job Ticket Editor. To modify
these fields, open the Job Ticket Editor then select [Basic Set-
tings] --> [Paper] --> [Paper Name] then select [No value set] from
the drop-down menu. When [No value set] is selected, the [Paper
Size], [Paper Weight], [Paper Color] and [Paper Type] fields retain
the values imposed by the [Paper Name] field but can be edited.
As long as the Job Ticket Editor remains open, the [Paper Name]
will appear as a drop-down option. If the [No value set] option is
selected and then the [Save] button is clicked on the Job Ticket
Editor, the [Paper Size], [Paper Weight], [Paper Color] and [Paper
Type] values are saved. The [Paper Name] field is removed as an
option from the drop-down menu and cannot be reapplied at a lat-
er time.

Use Perforated Paper

If [Use Perforated Paper] is selected for the print job, the drop-
down menu displays [On]. If pre-punched paper is not required,
the menu displays [Off]. You may change the selection.

This is the default setting. Use this option for normal printing.