Konica Minolta Printgroove - Manual (Page 80)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-9
Selected Printer Field If this value appears, it indicates that the person who sent the job
to Printgroove POD Queue wants the job to print on the noted
printer. Both the field and the checkbox are grayed out since the
setting is specified in another Printgroove POD module and can-
not be modified from within Printgroove POD Queue. The values
that appear in this field are provided by Printgroove POD Queue
(please see “Exporting Printgroove POD Queue Printer Capabili-
ties” on page 3-29 for details). If a value is selected in this field,
Printgroove POD Queue will process the job as follows:
• Printgroove POD Queue’s Auto Mode setting is ignored. Print-
groove POD Queue automatically sends the job to the
specified printer’s queue. Copy:If a Printgroove POD
Queue job does not have a PDF file attached, Copy
automatically appears in this field.
• If Printgroove POD Queue does not recognize the selected
printer, the job is moved to the Inbox panel and must
be processed manually.
• If Printgroove POD Queue recognizes the printer, a constraint
check is performed. If issues are found, you are noti-
fied via a Constraints message. If constraints cannot
be resolved the job remains in the Inbox and must be
modified accordingly. The Job Ticket may be altered
and a different printer may be selected. If a different
printer is selected, the value in the Selected Printer
field does not change in order to show the original
printer request.
• If no constraints are found, if constraints are found and cor-
rected or if another printer is selected, the job proc-
esses normally.