Konica Minolta Printgroove - Manual (Page 103)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-32
Media (CD/DVD) Media If the value is CD/DVD: This job should be
burned to a CD/DVD.
If the value is Envelope/Envelope Window/La-
bels/Letterhead/Tab Stock: These Paper Types
cannot be specified directly by POD Queue. Re-
solve as follows:
• Review the Notes section of the Job Ticket.
Multiple media types may be required for a
single print job.
• If the media type is supported by the device,
load the noted media into a tray then select
the tray using the Job Ticket Editor (Basic
Settings --> Paper --> Paper Source). Drag-
&-drop the job to the device to which the se-
lected tray belongs and the job should proc-
ess normally.
These settings are noted on the Banner Page of
the job.
Grade If a value appears in either of these fields, the
Job Ticket may need to be modified to accom-
modate the setting. Resolve as follows:
• Open the Job Ticket Editor then select Basic
Settings --> Paper --> Paper Type. Check
the drop-down menu for a value that meets
the setting requirements and, if found, select.
• If a corresponding value does not appear in
the drop-down menu, load the noted paper
into a tray then select the tray using the Job
Ticket Editor (Basic Settings --> Paper -->
Paper Source). Drag-&-drop the job to the
device to which the selected tray belongs
and the job should process normally.
These settings are noted on the Banner Page of
the job.
Coating
Paper (specific color) If a color appears here, it indicates that Print-
groove POD Queue does not recognize the Pa-
per Color value. Resolve as follows:
• Load the noted paper into a tray then select
the tray using the Job Ticket Editor (Basic
Settings --> Paper --> Paper Source). Drag-
&-drop the job to the device to which the se-
lected tray belongs and the job should proc-
ess normally.
The setting is noted on the Banner Page of the
job.
Non-Supported Settings Processing Options
Setting Sub-Setting Processing Options