Konica Minolta Printgroove - Manual (Page 109)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-38
Edit a Job Ticket Template
Use this method to Edit a Template
1
Select a Job Ticket in the Inbox panel.
2
Right-click and select [Edit] from the drop-down menu or double-click
the job. The Job Ticket Editor opens.
3
Select the [Templates] radio button in the top-right panel.
4
Select the Template you want to Edit from the Templates drop-down
menu.
– NOTE: If another user is viewing the selected Template, a pop-up
message informs you that the Template is locked.
5
Modify the Job Ticket Template settings, as required.
6
Click the [Save] button. The changes are applied and the Job Ticket
Editor remains open.
7
Click the [Cancel] button to exit the Job Ticket Editor.
Apply a Job Ticket Template
1
Select a Job Ticket in the Inbox panel. Right-click and select [Edit] from
the drop-down menu or double-click the job to open the Job Ticket Ed-
itor.
2
The Job Ticket radio button is selected. The Job Ticket [Name] and
[Number] fields contain the information that applies to the selected
print job. Select the [Template] radio button.
3
From the [Templates] drop-down menu, select the Template you wish
to apply to the selected print job.
4
Click the [Apply] button. All settings specified in the Template are ap-
plied to the selected print job. If the Job Ticket has additional settings
not specified in the Template, they are not affected and remain as set.
5
If the [Cancel] button is selected, the applied Template settings are not
saved. If the [Save] button is selected, the changes are saved and the
Job Ticket Editor closes.